產品詳細信息 更多+
                        玻璃盤360度牙傷光學篩選機

                        長按識別二維碼查看詳情

                        長按圖片可保存到相冊

                        圖片加載中,請稍等 ...
                        長按圖片保存/分享
                        玻璃盤360度牙傷光學篩選機
                        玻璃盤360度牙傷光學篩選機
                        瀏覽:
                        詳情

                        玻璃盤360度牙傷光學篩選機

                        Optical screening machine for teeth injury of glass plate in 360 degrees

                        HL-05-360-LSLM

                        參數規格

                        Specifications

                        本機臺外觀尺寸:

                        2300mm*1200mm*2300mm(**)

                        機臺重量:約750KG

                        更換規格:約10分鐘

                        檢測范圍:

                        長度:10-60MM  直徑:5-25mm (可以倒立)

                        速度最快可達600/分鐘

                        本機臺為檢測螺栓、螺帽一體機

                        最多可裝8CCD

                        電源:交流單項220V  50HZ

                        功率:約3KW

                        The appearance size of this machine:

                        About 1200mm*1200mm*2300mm (length*width*height)

                        Machine weight: about 750KG

                        Replacement specification: about 10 min

                        examination range:

                        Length: 10-60mm Diameter: 5-25mm (can be inverted)

                        The fastest speed:600 / min

                        This machine is a testing bolt and nut integrated machine

                        Up to 8 CCDs

                        Power: AC single 220V 50HZ

                        Power: about 3KW

                        可檢測項目

                        Suitable for

                        ○外螺紋360度牙傷檢測;○螺紋直徑公差檢測;

                        ○最大/最小對邊公差檢測;○有無印記檢測;

                        ○螺紋牙底徑檢測;○最大/最小對角公差檢測;

                        ○螺紋牙中徑檢測;○內孔與外圓同心度檢測;○牙距檢測;

                        ○內孔徑有無毛刺檢測;○有無螺紋檢測;

                        ○頭部有無電鍍檢測;○斜牙檢測;○頭部表面開裂;

                        ○粗細牙檢測;○內孔直徑公差;○尖銳度檢測;

                        ○有無焊點,及焊點數檢測;○頭部真圓度測量;

                        ○焊點面積檢測;○搓牙有無到位檢測;○牙數檢測;

                        ○螺帽牙內有無鐵屑檢測;○各部位臺階公差檢測;

                        ○梅花形狀及有無滾花檢測;○頭部厚度公差檢測;

                        ○螺帽爛牙、壞牙檢測(可360度檢測);○總長度公差檢測;

                        Thread diameter tolerance detection;Maximum / minimum alignment tolerance detection;Threaded teeth bottom diameter detection; Maximum/minimum diagonal tolerance detection;Thread middle diameter detection; Concentricity detection of inner hole and outer circle; Distance detection between teeth;

                        Detection for burr in internal aperture or not; Thread or not;

                        Electroplating on head or not; Oblique teeth detection; Head surface cracking;

                        Teeth thickness detection; Diameter tolerance of inner hole; Sharpness detection;Detection for solder joint or not and the number;Head roundness measurement;Solder joint area detection;Detection for rub teeth in place or not;Teeth number detection;Detection for iron chip in nut teeth or not; Step tolerance detection of each part;Detection of plum blossoms and annular knurl or not; Head thickness tolerance detection;Detection for broken teeth and bad teeth of nut (360 degree detection);Total length tolerance detection;




                        @copyright 2019 華磊(嘉興)智能科技有限公司

                        All rights reserved 浙ICP備19042112號-1

                        添加微信好友,詳細了解產品
                        使用企業微信
                        “掃一掃”加入群聊
                        復制成功
                        添加微信好友,詳細了解產品
                        我知道了
                        北岛玲HEYZO高清中文字幕,亚洲欧美综合制服丝袜国产,日本特级牲交视频在线观看,影音先锋中文字幕35页,99爱在线精品免费观看,国产青年GAY同男视频网站,狼人色国产在线视频爱雨网,6080新觉伦午夜视频在线观看,日韩免费一级毛片在线视频