產品詳細信息 更多+
                        懸掛插針式分度盤篩選機

                        長按識別二維碼查看詳情

                        長按圖片可保存到相冊

                        圖片加載中,請稍等 ...
                        長按圖片保存/分享
                        懸掛插針式分度盤篩選機
                        懸掛插針式分度盤篩選機
                        瀏覽:
                        詳情

                        懸掛插針式分度盤篩選機

                        Screening machine for hanging needle dividing plate

                        可檢測項目

                        Suitable for

                        ○螺紋直徑公差檢;○頭部最大/最小對邊公差檢測;

                        ○螺紋牙底徑檢測;○最大/最小對角公測;○斜牙檢測;

                        ○螺紋牙中徑檢測;○內孔與外圓同心度檢測;○牙距檢測;

                        ○內孔徑有無毛刺檢測;○頭部有無電鍍檢測;

                        ○有無螺紋檢測;○頭部表面開裂(有油件、側面開裂除外);

                        ○粗細牙檢測;○內孔直徑公差;○尾端尖銳度檢測;

                        ○有無焊點及焊點數檢測;○頭部真圓度測量;

                        ○焊點面積檢測;○各部位臺階公差檢測;○梅花形狀檢測;

                        ○頭部厚度公差檢測;○有無牙檢測;○牙部長度公差檢測;

                        ○針孔堵塞檢測;○有無十字針孔;

                        Thread diameter tolerance detection; Maximum / minimum alignment tolerance detection on head;

                        Threaded teeth bottom diameter detection; Maximum/minimum diagonal tolerance detection; Oblique teeth detection;

                        Thread middle diameter detection; Concentricity detection of inner hole and outer circle; Distance detection between teeth;

                        Detection for burr in internal aperture or not; Electroplating on head or not;

                        Thread or not; Head surface cracking (except for with oil parts and side cracking).

                        Teeth thickness detection; Diameter tolerance of inner hole; Sharpness detection of end;

                        Detection for solder joint or not and the number; Head roundness measurement;

                        Solder joint area detection; Step tolerance detection of each part; Shape detection of plum blossoms;

                        Head thickness tolerance detection; Teeth or not; Detection of tooth length tolerance;

                        Pinhole blockage detection; Cross pinholes or not;

                        參數規格

                        Specifications

                        本機臺外觀尺寸(**)

                        1000mm*1000mm*2300mm

                        機臺重量:約650KG

                        更換規格:約20分鐘

                        檢測范圍:

                        長度:30-100mm;直徑:3-12mm  

                        速度最快可達400/分鐘

                        電源:交流單項220V  50HZ

                        可裝4CCD

                        功率:約3KW

                        運轉方式:連續運轉方式

                         

                        Product Size(L x W x H):

                        About 1000mm*1000mm*2300mm

                        Machine weight: about 650KG

                        Replacement specification: about 20 min

                        examination range:

                        Length: 30-100mm; Diameter: 3-12mm

                        The fastest speed:400pcs / min

                        Power: AC single 220V 50HZ

                        Can carry 4 CCD

                        Power: about 3KW

                        Mode of operation: mode of continuous operation




                        @copyright 2019 華磊(嘉興)智能科技有限公司

                        All rights reserved 浙ICP備19042112號-1

                        添加微信好友,詳細了解產品
                        使用企業微信
                        “掃一掃”加入群聊
                        復制成功
                        添加微信好友,詳細了解產品
                        我知道了
                        北岛玲HEYZO高清中文字幕,亚洲欧美综合制服丝袜国产,日本特级牲交视频在线观看,影音先锋中文字幕35页,99爱在线精品免费观看,国产青年GAY同男视频网站,狼人色国产在线视频爱雨网,6080新觉伦午夜视频在线观看,日韩免费一级毛片在线视频