產品詳細信息 更多+
                        光學影像、渦電流探傷組合篩選機

                        長按識別二維碼查看詳情

                        長按圖片可保存到相冊

                        圖片加載中,請稍等 ...
                        長按圖片保存/分享
                        光學影像、渦電流探傷組合篩選機
                        光學影像、渦電流探傷組合篩選機
                        瀏覽:
                        詳情

                        HL-05-ATWL-LS

                        光學影像、渦電流探傷組合篩選機

                        Combined screening machine of optical image and vortex current flaw detection

                        裂紋檢測精度:深度>0.1mm 寬度0.06mm

                        Crack detection accuracy: depth0.1mm  width 0.06mm

                        參數規格

                        Specifications

                        本機臺外觀尺寸(**)

                        2000mm*1200mm*2300mm

                        機臺重量:約850KG

                        更換規格:約30分鐘

                        檢測范圍:

                        長度:10-60mm 直徑:10-30mm

                        速度最快可達20/分鐘

                        裂紋檢測精度:深度>0.1mm 寬度0.06mm

                        電源:交流單項220V  50HZ

                        功率:約3KW

                        Product Size(L x W x H):

                        About 2000mm*1200mm*2300mm

                        Machine weight: about 850KG

                        Replacement specifications: about 30 min

                        examination range:

                        Length: 10-60mm Diameter: 10-30mm

                        The fastest speed:20 pcs / min

                        Crack detection accuracy: depth >0.1mm width 0.06mm

                        Power: AC single 220V 50HZ

                        Power: about 3KW

                        可檢測項目

                        Suitable for

                        表面劃傷、淬火開裂檢測(渦流檢測)

                        ○螺紋直徑公差檢測;○最大/最小對邊公差檢測;

                        ○螺紋牙底徑檢測;○螺紋牙中徑檢測;○牙距檢測;

                        ○有無螺紋檢測;○斜牙檢測;○粗細牙檢測;

                        ○頭部有無電鍍檢測;○頭部真圓度測量;○內孔直徑公差;

                        ○搓牙有無到位檢測;○各部位臺階公差檢測;

                        ○頭部厚度公差檢測;○總長度公差檢測;○側面開裂檢測;

                        Surface scratch and quenching cracking detection (Eddy current detection)

                        Thread diameter tolerance detection; Maximum / minimum alignment tolerance detection;

                        Threaded teeth bottom diameter detection; Thread middle diameter detection; Distance detection between teeth;

                        Thread or not; Oblique teeth detection; Teeth thickness detection;

                        Electroplating on head or not; Head roundness measurement; Diameter tolerance of inner hole;

                        Detection for rub teeth in place or not; Step tolerance detection of each part;

                        Head thickness tolerance detection;

                        Total length tolerance detection; Side cracking detection;

                        本設備用于檢測高端螺栓外觀尺寸、渦流表面探傷組合篩選機。

                        本機采用德國原裝進口Ibg渦流主機

                        This equipment is used to detect the appearance size of high-end bolt, vortex surface flaw detection combination screening machine.

                        This machine adopts imported Ibg eddy current main engine from Germany.




                        @copyright 2019 華磊(嘉興)智能科技有限公司

                        All rights reserved 浙ICP備19042112號-1

                        添加微信好友,詳細了解產品
                        使用企業微信
                        “掃一掃”加入群聊
                        復制成功
                        添加微信好友,詳細了解產品
                        我知道了
                        北岛玲HEYZO高清中文字幕,亚洲欧美综合制服丝袜国产,日本特级牲交视频在线观看,影音先锋中文字幕35页,99爱在线精品免费观看,国产青年GAY同男视频网站,狼人色国产在线视频爱雨网,6080新觉伦午夜视频在线观看,日韩免费一级毛片在线视频